What about REST?

ZAPI will reach end of availablity in ONTAP 9.13.1 released Q2 2023. Don't worry, Harvest has you covered. Switch to Harvest's REST collectors and collect idential metrics. See REST Strategy for more details.

Zapi Collector¶

The Zapi collectors use the ZAPI protocol to collect data from ONTAP systems. The collector submits data as received from the target system, and does not perform any calculations or post-processing. Since the attributes of most APIs have an irregular tree structure, sometimes a plugin will be required to collect all metrics from an API.

The ZapiPerf collector is an extension of this collector, therefore, they share many parameters and configuration settings.

Target System¶

Target system can be any cDot or 7Mode ONTAP system. Any version is supported, however the default configuration files may not completely match with older systems.

Requirements¶

No SDK or other requirements. It is recommended to create a read-only user for Harvest on the ONTAP system (see prepare monitored clusters for details)

Metrics¶

The collector collects a dynamic set of metrics. Since most ZAPIs have a tree structure, the collector converts that structure into a flat metric representation. No post-processing or calculation is performed on the collected data itself.

As an example, the aggr-get-iter ZAPI provides the following partial attribute tree:

aggr-attributes:
  - aggr-raid-attributes:
      - disk-count
  - aggr-snapshot-attributes:
      - files-total

The Zapi collector will convert this tree into two "flat" metrics: aggr_raid_disk_count and aggr_snapshot_files_total. (The algorithm to generate a name for the metrics will attempt to keep it as simple as possible, but sometimes it's useful to manually set a short display name. See counters for more details.

Parameters¶

The parameters of the collector are distributed across three files:

Harvest configuration file (default: harvest.yml)
ZAPI configuration file (default: conf/zapi/default.yaml)
Each object has its own configuration file (located in conf/zapi/$version/)

Except for addr and datacenter, all other parameters of the ZAPI collector can be defined in either of these three files. Parameters defined in the lower-level file, override parameters in the higher-level ones. This allows you to configure each object individually, or use the same parameters for all objects.

The full set of parameters are described below.

Collector configuration file¶

The parameters are similar to those of the ZapiPerf collector. Parameters different from ZapiPerf:

parameter	type	description
`jitter`	duration (Go-syntax), optional	Each Harvest collector runs independently, which means that at startup, each collector may send its ZAPI queries at nearly the same time. To spread out the collector startup times over a broader period, you can use `jitter` to randomly distribute collector startup across a specified duration. For example, a `jitter` of `1m` starts each collector after a random delay between 0 and 60 seconds. For more details, refer to this discussion.
`schedule`	required	same as for ZapiPerf, but only two elements: `instance` and `data` (collector does not run a `counter` poll)
`no_max_records`	bool, optional	don't add `max-records` to the ZAPI request
`collect_only_labels`	bool, optional	don't look for numeric metrics, only submit labels (suppresses the `ErrNoMetrics` error)
`only_cluster_instance`	bool, optional	don't look for instance keys and assume only instance is the cluster itself

Object configuration file¶

The Zapi collector does not have the parameters instance_key and override parameters. The optional parameter metric_type allows you to override the default metric type (uint64). The value of this parameter should be one of the metric types supported by the matrix data-structure.

The Object configuration file ("subtemplate") should contain the following parameters:

parameter	type	description
`name`	string, required	display name of the collector that will collect this object
`query`	string, required	REST endpoint used to issue a REST request
`object`	string, required	short name of the object
`counters`	string	list of counters to collect (see notes below)
`plugins`	list	plugins and their parameters to run on the collected data
`export_options`	list	parameters to pass to exporters (see notes below)

Counters¶

This section defines the list of counters that will be collected. These counters can be labels, numeric metrics or histograms. The exact property of each counter is fetched from ONTAP and updated periodically.

Some counters require a "base-counter" for post-processing. If the base-counter is missing, ZapiPerf will still run, but the missing data won't be exported.

The display name of a counter can be changed with => (e.g., nfsv3_ops => ops). There's one conversion Harvest does for you by default, the instance_name counter will be renamed to the value of object.

Counters that are stored as labels will only be exported if they are included in the export_options section.

Export_options¶

Parameters in this section tell the exporters how to handle the collected data.

There are two different kinds of time-series that Harvest publishes: metrics and instance labels.

Metrics are numeric data with associated labels (key-value pairs). E.g. volume_read_ops_total{cluster="cluster1", node="node1", volume="vol1"} 123. The volume_read_ops_total metric is exporting three labels: cluster, node, and volume and the metric value is 123.
Instance labels are named after their associated config object (e.g., volume_labels, qtree_labels, etc.). There will be one instance label for each object instance, and each instance label will contain a set of associated labels (key-value pairs) that are defined in the templates instance_labels parameter. E.g. volume_labels{cluster="cluster1", node="node1", volume="vol1", svm="svm1"} 1. The volume_labels instance label is exporting four labels: cluster, node, volume, and svm. Instance labels always export a metric value of 1.

The export_options section allows you to define how to export these time-series.

instances_keys (list): display names of labels to export to both metric and instance labels. For example, if you list the svm counter under instances_keys, that key-value will be included in all time-series metrics and all instance-labels.
instance_labels (list): display names of labels to export with the corresponding instance label config object. For example, if you want the volume counter to be exported with the volume_labels instance label, you would list volume in the instance_labels section.
include_all_labels (bool): exports all labels for all time-series metrics. If there are no metrics defined in the template, this option will do nothing. This option also overrides the previous two parameters. See also collect_only_labels.

ZapiPerf Collector¶

ZapiPerf¶

ZapiPerf collects performance metrics from ONTAP systems using the ZAPI protocol. The collector is designed to be easily extendable to collect new objects or to collect additional counters from already configured objects.

This collector is an extension of the Zapi collector. The major difference between them is that ZapiPerf collects only the performance (perf) APIs. Additionally, ZapiPerf always calculates final values from the deltas of two subsequent polls.

Metrics¶

The collector collects a dynamic set of metrics. The metric values are calculated from two consecutive polls (therefore, no metrics are emitted after the first poll). The calculation algorithm depends on the property and base-counter attributes of each metric, the following properties are supported:

property	formula	description
raw	x = x_i	no post-processing, value x is submitted as it is
delta	x = x_i - x_i-1	delta of two poll values, x_i and x_i-1
rate	x = (x_i - x_i-1) / (t_i - t_i-1)	delta divided by the interval of the two polls in seconds
average	x = (x_i - x_i-1) / (y_i - y_i-1)	delta divided by the delta of the base counter y
percent	x = 100 * (x_i - x_i-1) / (y_i - y_i-1)	average multiplied by 100

Parameters¶

The parameters of the collector are distributed across three files:

Harvest configuration file (default: harvest.yml)
ZapiPerf configuration file (default: conf/zapiperf/default.yaml)
Each object has its own configuration file (located in conf/zapiperf/cdot/ and conf/zapiperf/7mode/ for cDot and 7Mode systems respectively)

Except for addr, datacenter and auth_style, all other parameters of the ZapiPerf collector can be defined in either of these three files. Parameters defined in the lower-level file, override parameters in the higher-level file. This allows the user to configure each object individually, or use the same parameters for all objects.

The full set of parameters are described below.

ZapiPerf configuration file¶

This configuration file (the "template") contains a list of objects that should be collected and the filenames of their configuration (explained in the next section).

Additionally, this file contains the parameters that are applied as defaults to all objects. (As mentioned before, any of these parameters can be defined in the Harvest or object configuration files as well).

parameter	type	description	default
`use_insecure_tls`	bool, optional	skip verifying TLS certificate of the target system	`false`
`client_timeout`	duration (Go-syntax)	how long to wait for server responses	30s
`batch_size`	int, optional	max instances per API request	`500`
`latency_io_reqd`	int, optional	threshold of IOPs for calculating latency metrics (latencies based on very few IOPs are unreliable)	`10`
`jitter`	duration (Go-syntax), optional	Each Harvest collector runs independently, which means that at startup, each collector may send its ZAPI queries at nearly the same time. To spread out the collector startup times over a broader period, you can use `jitter` to randomly distribute collector startup across a specified duration. For example, a `jitter` of `1m` starts each collector after a random delay between 0 and 60 seconds. For more details, refer to this discussion.
`schedule`	list, required	the poll frequencies of the collector/object, should include exactly these three elements in the exact same other:
- `counter`	duration (Go-syntax)	poll frequency of updating the counter metadata cache (example value: `20m`)
- `instance`	duration (Go-syntax)	poll frequency of updating the instance cache (example value: `10m`)
- `data`	duration (Go-syntax)	poll frequency of updating the data cache (example value: `1m`) Note Harvest allows defining poll intervals on sub-second level (e.g. `1ms`), however keep in mind the following: API response of an ONTAP system can take several seconds, so the collector is likely to enter failed state if the poll interval is less than `client_timeout`. Small poll intervals will create significant workload on the ONTAP system, as many counters are aggregated on-demand. Some metric values become less significant if they are calculated for very short intervals (e.g. latencies)

The template should define objects in the objects section. Example:

objects:
  SystemNode: system_node.yaml
  HostAdapter: hostadapter.yaml

Note that for each object we only define the filename of the object configuration file. The object configuration files are located in subdirectories matching to the ONTAP version that was used to create these files. It is possible to have multiple version-subdirectories for multiple ONTAP versions. At runtime, the collector will select the object configuration file that closest matches to the version of the target ONTAP system. (A mismatch is tolerated since ZapiPerf will fetch and validate counter metadata from the system.)

Object configuration file¶

The Object configuration file ("subtemplate") should contain the following parameters:

parameter	type	description
`name`	string	display name of the collector that will collect this object
`object`	string	short name of the object
`query`	string	raw object name used to issue a ZAPI request
`counters`	list	list of counters to collect (see notes below)
`instance_key`	string	label to use as instance key (either `name` or `uuid`)
`override`	list of key-value pairs	override counter properties that we get from ONTAP (allows circumventing ZAPI bugs)
`plugins`	list	plugins and their parameters to run on the collected data
`export_options`	list	parameters to pass to exporters (see notes below)

`counters`¶

This section defines the list of counters that will be collected. These counters can be labels, numeric metrics or histograms. The exact property of each counter is fetched from ONTAP and updated periodically.

Some counters require a "base-counter" for post-processing. If the base-counter is missing, ZapiPerf will still run, but the missing data won't be exported.

The display name of a counter can be changed with => (e.g., nfsv3_ops => ops). There's one conversion Harvest does for you by default, the instance_name counter will be renamed to the value of object.

Counters that are stored as labels will only be exported if they are included in the export_options section.

`export_options`¶

Parameters in this section tell the exporters how to handle the collected data.

There are two different kinds of time-series that Harvest publishes: metrics and instance labels.

Metrics are numeric data with associated labels (key-value pairs). E.g. volume_read_ops_total{cluster="cluster1", node="node1", volume="vol1"} 123. The volume_read_ops_total metric is exporting three labels: cluster, node, and volume and the metric value is 123.
Instance labels are named after their associated config object (e.g., volume_labels, nic_labels, etc.). There will be one instance label for each object instance, and each instance label will contain a set of associated labels (key-value pairs) that are defined in the templates instance_labels parameter. E.g. volume_labels{cluster="cluster1", node="node1", volume="vol1", svm="svm1"} 1. The volume_labels instance label is exporting four labels: cluster, node, volume, and svm. Instance labels always export a metric value of 1.

Instance labels are rarely used with ZapiPerf templates

They can be useful for exporting labels that are not associated with a metric value.

The export_options section allows you to define how to export these time-series.

instances_keys (list): display names of labels to export to both metric and instance labels. For example, if you list the svm counter under instances_keys, that key-value will be included in all time-series metrics and all instance-labels.
instance_labels (list): display names of labels to export with the corresponding instance label config object. For example, if you want the volume counter to be exported with the volume_labels instance label, you would list volume in the instance_labels section.

Filter¶

This guide provides instructions on how to use the filter feature in ZapiPerf. Filtering is useful when you need to query a subset of instances. For example, suppose you have a small number of high-value volumes from which you want Harvest to collect performance metrics every five seconds. Collecting data from all volumes at this frequency would be too resource-intensive. Therefore, filtering allows you to create/modify a template that includes only the high-value volumes.

Objects (Excluding Workload)¶

In ZapiPerf templates, you can set up filters under counters. Wildcards like * are useful if you don't want to specify all instances. Please note, ONTAP Zapi filtering does not support regular expressions, only wildcard matching with *.

For instance, to filter volume performance instances by instance name where the name is NS_svm_nvme or contains Test, use the following configuration in ZapiPerf volume.yaml under counters:

counters:
  ...
  - filter:
     - instance_name=NS_svm_nvme|instance_name=*Test*

You can define multiple values within the filter array. These will be interpreted as AND conditions by ONTAP. Alternatively, you can specify a complete expression within a single array element, as described in the ONTAP filtering section below.

ONTAP Filtering Details

For a better understanding of ONTAP's filtering mechanism, it allows the use of filter-data for the perf-object-instance-list-info-iter Zapi.

The filter-data is a string that signifies filter data, adhering to the format: counter_name=counter_value. You can define multiple pairs, separated by either a comma (",") or a pipe ("|").

Here's the interpretation:

A comma (",") signifies an AND operation.
A pipe ("|") signifies an OR operation.
The precedence order is AND first, followed by OR.

For instance, the filter string instance_name=volA,vserver_name=vs1|vserver_name=vs2 translates to (instance_name=volA && vserver_name=vs1) || (vserver_name=vs2).

This filter will return instances on Vserver vs1 named volA, and all instances on Vserver vs2.

Workload Templates¶

Performance workload templates require a different syntax because instances are retrieved from the qos-workload-get-iter ZAPI instead of perf-object-instance-list-info-iter.

The qos-workload-get-iter ZAPI supports filtering on the following fields:

workload-uuid
workload-name
workload-class
wid
category
policy-group
vserver
volume
lun
file
qtree
read-ahead
max-throughput
min-throughput
is-adaptive
is-constituent

You can include these fields under the filter parameter. For example, to filter Workload performance instances by workload-name where the name contains NS or Test and vserver is vs1, use the following configuration in ZapiPerf workload.yaml under counters:

counters:
  ...
  - filter:
      - workload-name: "*NS*|*Test*"
      - vserver: vs1

Partial Aggregation¶

There are instances when ONTAP may report partial aggregate results for certain objects (for example, during a node outage). In such cases, the ZapiPerf Collector will skip the reporting of performance counters for the affected objects.

To determine whether partial aggregation affects an object, check the numPartials entry in the Harvest logs. If numPartials is greater than zero, it indicates that partial aggregations have occurred for that object. e.g. Collected Poller=aff-251 collector=ZapiPerf:NFSv4 instances=56 numPartials=15

Zapi Collector¶

Target System¶

Requirements¶

Metrics¶

Parameters¶

Collector configuration file¶

Object configuration file¶

Counters¶

Export_options¶

ZapiPerf Collector¶

ZapiPerf¶

Metrics¶

Parameters¶

ZapiPerf configuration file¶

Object configuration file¶

counters¶

export_options¶

Filter¶

Objects (Excluding Workload)¶

Workload Templates¶

Partial Aggregation¶

`counters`¶

`export_options`¶