This section provides an example configuration script to be
executed within Data ONTAP that enables one SVM appropriately
configured for the Manila configuration referenced in
the section called “manila.conf”.
Note that you may have to edit IP addresses and feature lists
based on the environment and licenses present.
# create aggrs storage aggregate create -aggregate aggr1 -diskcount 24 \ -nodes cluster-1-01 storage aggregate create -aggregate aggr2 -diskcount 24 \ -nodes cluster-1-02 # create SVMs vserver create -vserver manila-vserver -rootvolume vol1 \ -aggregate aggr1 -ns-switch file -rootvolume-security-style unix # NFS setup nfs create -vserver manila-vserver -access true network interface create -vserver manila-vserver \ -lif manila-nfs-data -role data -home-node cluster-1-02 \ -home-port e0d -address10.63.40.153-netmask255.255.192.0vserver export-policy rule create -vserver manila-vserver \ -policyname default -clientmatch 0.0.0.0/0 -rorule any -rwrule \ any -superuser any -anon 0 # enable v4.0, v4.1, pNFS nfs modify -vserver manila-vserver -v4.0 enabled -v4.1 enabled \ -v4.1-pnfs enabled # assign aggregates to vserver vserver modify -vserver manila-vserver -aggr-list aggr1,aggr2
