NetApp Unified Driver for Data ONTAP operating in 7-Mode with NFS

The NetApp unifed driver for Data ONTAP operating in 7-Mode with NFS is a driver interface from OpenStack block storage to a Data ONTAP cluster system to accomplish provisioning and management of OpenStack volumes on NFS exports provided by the Data ONTAP cluster system. The NetApp unified driver for the Data ONTAP cluster does not require any additional management software to achieve the desired functionality. It uses NetApp APIs to interact with the Data ONTAP cluster.

 Configuration Options

To set up the NetApp Data ONTAP operating in 7-Mode NFS driver for Cinder, the following stanza should be added to the Cinder configuration file (cinder.conf):

[myNfsBackend] 1
volume_backend_name=myNfsBackend
volume_driver=cinder.volume.drivers.netapp.common.NetAppDriver
netapp_server_hostname=hostname
netapp_server_port=80
netapp_storage_protocol=nfs 
netapp_storage_family=ontap_7mode 2
netapp_login=admin_username
netapp_password=admin_password
nfs_shares_config=path_to_nfs_exports_file
            

 1

Be sure that the value of the enabled_backends option in the [DEFAULT] stanza includes the name of the stanza you chose for the backend.

 2

The value of netapp_storage_family MUST be set to ontap_7mode, as the default value for this option is ontap_cluster.

[Note]Note

The file referenced in the nfs_shares_config configuration option should contain the NFS exports in the ip:/share format, for example:

10.63.165.215:/nfs/test
10.63.165.215:/nfs2/test2
                

where ip corresponds to the IP address assigned to a Data LIF, and share refers to a junction path for a FlexVol volume within an SVM. Make sure that volumes corresponding to exports have read/write permissions set on the Data ONTAP controllers.

Table 4.11, “Configuration options for Data ONTAP operating in 7-Mode with NFS” lists the configuration options available for the unified driver for a Data ONTAP operating in 7-Mode deployment that uses the NFS storage protocol.

Table 4.11. Configuration options for Data ONTAP operating in 7-Mode with NFS
Option Type Default Value Description
netapp_server_hostname Required The hostname or IP address for the storage system or proxy server. The value of this option should be the IP address of either the cluster management LIF or the SVM management LIF.
netapp_server_port Optional The TCP port to use for communication with the storage system or proxy server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS.
netapp_login Required Administrative user account name used to access the storage system or proxy server.
netapp_password Required Password for the administrative user account specified in the netapp_login option.
netapp_storage_protocol Required nfs The storage protocol to be used. Valid options are nfs or iscsi. If None is specified or the option is omitted, nfs will be used.
netapp_transport_type Optional http Transport protocol for communicating with the storage system or proxy server. Valid options include http and https.
netapp_vfiler Optional The vFiler unit on which provisioning of block storage volumes will be done. This option is only used by the driver when connecting to an instance with a storage family of Data ONTAP operating in 7-Mode. Only use this option when utilizing the MultiStore feature on the NetApp storage system.
netapp_storage_family Optional ontap_cluster The storage family type used on the storage system; valid values are ontap_7mode for Data ONTAP operating in 7-Mode, ontap_cluster for clustered Data ONTAP, or eseries for E-Series.
thres_avl_size_perc_start Optional 20 If the percentage of available space for an NFS share has dropped below the value specified by this option, the NFS image cache will be cleaned.
thres_avl_size_perc_stop Optional 60 When the percentage of available space on an NFS share has reached the percentage specified by this option, the driver will stop clearing files from the NFS image cache that have not been accessed in the last M minutes, where M is the value of the expiry_thres_minutes configuration option.
expiry_thres_minutes Optional 720 This option specifies the threshold for last access time for images in the NFS image cache. When a cache cleaning cycle begins, images in the cache that have not been accessed in the last M minutes, where M is the value of this parameter, will be deleted from the cache to create free space on the NFS share.


loading table of contents...