Skip to content

Docker

Overview

Harvest is container-ready and supports several deployment options:

Docker Compose

This is a quick way to install and get started with Harvest. Follow the four steps below to:

  • Setup Harvest, Grafana, and Prometheus via Docker Compose
  • Harvest dashboards are automatically imported and setup in Grafana with a Prometheus data source
  • A separate poller container is created for each monitored cluster
  • All pollers are automatically added as Prometheus scrape targets

Setup harvest.yml

  • Create a harvest.yml file with your cluster details, below is an example with annotated comments. Modify as needed for your scenario.

This config is using the Prometheus exporter port_range feature, so you don't have to manage the Prometheus exporter port mappings for each poller.

Exporters:
  prometheus1:
    exporter: Prometheus
    addr: 0.0.0.0
    port_range: 2000-2030  # <====== adjust to be greater than equal to the number of monitored clusters

Defaults:
  collectors:
    - Zapi
    - ZapiPerf
    - EMS
  use_insecure_tls: true   # <====== adjust as needed to enable/disable TLS checks 
  exporters:
    - prometheus1

Pollers:
  infinity:                # <====== add your cluster(s) here, they use the exporter defined three lines above
    datacenter: DC-01
    addr: 10.0.1.2
    auth_style: basic_auth
    username: user
    password: 123#abc
  # next cluster ....  

Generate a Docker compose for your Pollers

  • Generate a Docker compose file from your harvest.yml
docker run --rm \
  --env UID=$(id -u) --env GID=$(id -g) \
  --entrypoint "bin/harvest" \
  --volume "$(pwd):/opt/temp" \
  --volume "$(pwd)/harvest.yml:/opt/harvest/harvest.yml" \
  ghcr.io/netapp/harvest \
  generate docker full \
  --output harvest-compose.yml

By default, the above command uses the harvest configuration file(harvest.yml) located in the current directory. If you want to use a harvest config from a different location.

What if my harvest configuration file is somewhere else or not named harvest.yml

Use the following docker run command, updating the HYML variable with the absolute path to your harvest.yml.

HYML="/opt/custom_harvest.yml"; \
docker run --rm \
--env UID=$(id -u) --env GID=$(id -g) \
--entrypoint "bin/harvest" \
--volume "$(pwd):/opt/temp" \
--volume "${HYML}:${HYML}" \
ghcr.io/netapp/harvest:latest \
generate docker full \
--output harvest-compose.yml \
--config "${HYML}"

generate docker full does two things:

  1. Creates a Docker compose file with a container for each Harvest poller defined in your harvest.yml
  2. Creates a matching Prometheus service discovery file for each Harvest poller (located in container/prometheus/harvest_targets.yml). Prometheus uses this file to scrape the Harvest pollers.

Start everything

Bring everything up 🚀

docker-compose -f prom-stack.yml -f harvest-compose.yml up -d --remove-orphans

Note on Docker Logging Configuration

By default, Docker uses the json-file logging driver which does not limit the size of the logs. This can cause your system to run out of disk space. Docker provides several options for logging configuration, including different logging drivers and options for log rotation.

Docker recommends using the local driver to prevent disk-exhaustion. More details can be found in Docker logging documentation

Prometheus and Grafana

The prom-stack.yml compose file creates a frontend and backend network. Prometheus and Grafana publish their admin ports on the front-end network and are routable to the local machine. By default, the Harvest pollers are part of the backend network and also expose their Prometheus web end-points. If you do not want their end-points exposed, add the --port=false option to the generate sub-command in the previous step.

Prometheus

After bringing up the prom-stack.yml compose file, you can check Prometheus's list of targets at http://IP_OF_PROMETHEUS:9090/targets.

Grafana

After bringing up the prom-stack.yml compose file, you can access Grafana at http://IP_OF_GRAFANA:3000.

You will be prompted to create a new password the first time you log in. Grafana's default credentials are

username: admin
password: admin

Manage pollers

How do I add a new poller?

  1. Add poller to harvest.yml
  2. Regenerate compose file by running harvest generate
  3. Run docker compose up, for example,
docker-compose -f prom-stack.yml -f harvest-compose.yml up -d --remove-orphans

Stop all containers

docker-compose -f prom-stack.yml -f harvest-compose.yml down

If you encounter the following error message while attempting to stop your Docker containers using docker-compose down

Error response from daemon: Conflict. The container name "/poller-u2" is already in use by container

This error is likely due to running docker-compose down from a different directory than where you initially ran docker-compose up.

To resolve this issue, make sure to run the docker-compose down command from the same directory where you ran docker-compose up. This will ensure that Docker can correctly match the container names and IDs with the directory you are working in. Alternatively, you can stop the Harvest, Prometheus, and Grafana containers by using the following command:

docker ps -aq --filter "name=prometheus" --filter "name=grafana" --filter "name=poller-" | xargs docker stop | xargs docker rm

Note: Deleting or stopping Docker containers does not remove the data stored in Docker volumes.

Upgrade Harvest

Note: If you want to keep your historical Prometheus data, and you set up your Docker Compose workflow before Harvest 22.11, please read how to migrate your Prometheus volume before continuing with the upgrade steps below.

To upgrade Harvest:

  1. Retrieve the most recent version of the Harvest Docker image by executing the following command.This is needed since the new version may contain new templates, dashboards, or other files not included in the Docker image.

    docker pull ghcr.io/netapp/harvest
    

  2. Stop all containers

  3. Regenerate your harvest-compose.yml file by running harvest generate By default, generate will use the latest tag. If you want to upgrade to a nightly build see the twisty.

    I want to upgrade to a nightly build

    Tell the generate cmd to use a different tag like so:

    docker run --rm \
      --env UID=$(id -u) --env GID=$(id -g) \
      --entrypoint "bin/harvest" \
      --volume "$(pwd):/opt/temp" \
      --volume "$(pwd)/harvest.yml:/opt/harvest/harvest.yml" \
      ghcr.io/netapp/harvest:nightly \
      generate docker full \
      --image ghcr.io/netapp/harvest:nightly \
      --output harvest-compose.yml
    
  4. Restart your containers using the following:

docker-compose -f prom-stack.yml -f harvest-compose.yml up -d --remove-orphans

Building Harvest Docker Image

Building a custom Harvest Docker image is only necessary if you require a tailored solution. If your intention is to run Harvest using Docker without any customizations, please refer to the Overview section above.

docker build -f container/onePollerPerContainer/Dockerfile -t harvest:latest . --no-cache