NetApp Unified Driver for Clustered Data ONTAP with Fibre Channel

The NetApp unified driver for clustered Data ONTAP with Fibre Channel is a driver interface from OpenStack Cinder to NetApp clustered Data ONTAP storage controllers to accomplish provisioning and management of a storage-area network (SAN) block storage entity; that is, a NetApp LUN that uses the Fibre Channel protocol.

 Configuration Options

To set up the NetApp clustered Data ONTAP Fibre Channel driver for Cinder, the following stanza should be added to the Cinder configuration file (cinder.conf):

[myFCBackend] 1
volume_backend_name=myFCBackend
volume_driver=cinder.volume.drivers.netapp.common.NetAppDriver
netapp_server_hostname=hostname
netapp_server_port=80
netapp_storage_protocol=fc 2
netapp_storage_family=ontap_cluster
netapp_login=admin_username
netapp_password=admin_password
netapp_vserver=svm_name
max_over_subscription_ratio=1.0
reserved_percentage=5
            

 1

Be sure that the value of the enabled_backends option in the [DEFAULT] stanza includes the name of the stanza you chose for the backend.

 2

The value of netapp_storage_protocol MUST be set to fc.

Table 4.13, “Configuration options for clustered Data ONTAP with Fibre Channel” lists the configuration options available for the unified driver for a clustered Data ONTAP deployment that uses the Fibre Channel storage protocol.

Table 4.13. Configuration options for clustered Data ONTAP with Fibre Channel
Option Type Default Value Description
netapp_server_hostname Required The hostname or IP address for the storage system or proxy server. The value of this option should be the IP address of either the cluster management LIF or the SVM management LIF.
netapp_server_port Optional The TCP port to use for communication with the storage system or proxy server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS.
netapp_login Required Administrative user account name used to access the storage system or proxy server.
netapp_password Required Password for the administrative user account specified in the netapp_login option.
netapp_storage_protocol Required The storage protocol to be used. Valid options are nfs, iscsi or fc.
netapp_transport_type Required http Transport protocol for communicating with the storage system or proxy server. Valid options include http and https.
netapp_size_multiplier Optional 1.2 When creating volumes, the quantity to be multiplied to the requested OpenStack volume size to ensure enough space is available on the SVM (aka Vserver). This value is currently only used when iSCSI has been selected as the storage protocol to be used.
netapp_vserver Required This option specifies the storage virtual machine (previously called a Vserver) name on the storage cluster on which provisioning of block storage volumes should occur.
netapp_storage_family Optional ontap_cluster The storage family type used on the storage system; valid values are ontap_7mode for Data ONTAP operating in 7-Mode, ontap_cluster for clustered Data ONTAP, or eseries for E-Series.
netapp_pool_name_search_pattern Optional (.+) This option is only utilized when the Cinder driver is configured to use iSCSI or Fibre Channel. It is used to restrict provisioning to the specified FlexVol volumes. Specify the value of this option as a regular expression which will be applied to the names of FlexVol volumes from the storage backend which represent pools in Cinder. ^ (beginning of string) and $ (end of string) are implicitly wrapped around the regular expression specified before filtering.
netapp_lun_space_reservation optional enabled This option specifies whether space will be reserved when creating Cinder volumes on NetApp backends using the iSCSI or FC storage protocols. If this option is set to enabled, LUNs created during volume creation or volume cloning workflows will always be thick provisioned. If this option is set to disabled, LUNs created during volume creation or volume cloning workflows will always be thin provisioned. Note that this option does not affect the implementation of Cinder snapshots, where the LUN clone that represents the snapshot will always be thin provisioned. Valid options are enabled and disabled.
reserved_percentage Optional 0 This option represents the amount of total capacity of a storage pool that will be reserved and cannot be utilized for provisioning Cinder volumes.
max_over_subscription_ratio Optional 20.0 This option is defined as a float, and specifies the amount of over-provisioning to allow when thin provisioning is being used in the storage pool. A value of 1.0 will mean that the provisioned capacity will not be able to exceed the total capacity, while larger values will result in increased levels of allowed over-provisioning.
[Caution]Caution

If you specify an account in the netapp_login option that only has SVM administration privileges (rather than cluster administration privileges), some advanced features of the NetApp unified driver will not work and you may see warnings in the Cinder logs. See the section called “Account Permission Considerations” for more details on the required access level permissions for an SVM admin account.

[Important]Important

In order for Fibre Channel to be set up correctly, you also need to set up Fibre Channel zoning for your backends. See the section called “Fibre Channel Switch Fabric With Cinder” for more details on configuring Fibre Channel zoning.



loading table of contents...