This section provides an example configuration script to be executed within Data ONTAP that enables two SVMs, appropriately configured for the Cinder configuration referenced in the section called “cinder.conf”. Note that you may have to edit IP addresses and feature lists based on the environment and licenses present.
# create aggrs storage aggregate create -aggregate aggr1 -diskcount 24 -nodes \ democluster-1-01 storage aggregate create -aggregate aggr2 -diskcount 24 -nodes \ democluster-1-02 # create SVMs vserver create -vserver demo-iscsi-svm -rootvolume vol1 \ -aggregate aggr1 -ns-switch file -rootvolume-security-style unix vserver create -vserver demo-nfs-svm -rootvolume vol1 \ -aggregate aggr2 -ns-switch file -rootvolume-security-style unix # iSCSI setup iscsi create -vserver demo-iscsi-svm network interface create -vserver demo-iscsi-svm -lif \ demo-iscsi-data -role data -data-protocol iscsi -home-node \ democluster-1-01 -home-port e0d -address10.63.40.149\ -netmask255.255.192.0volume create -vserver demo-iscsi-svm -volume vol2 \ -aggregate aggr1 -size 10g vserver export-policy rule create -vserver demo-iscsi-svm \ -policyname default -clientmatch 0.0.0.0/0 -rorule any -rwrule \ any -superuser any -anon 0 volume create -vserver rcallawa-iscsi-vserver -volume vol1_plain \ -aggregate aggr1 -size 10g # NFS setup nfs create -vserver demo-nfs-svm -access true network interface create -vserver demo-nfs-svm -lif demo-nfs-data \ -role data -home-node democluster-1-02 -home-port e0d -address \10.63.40.153-netmask255.255.192.0vserver export-policy rule create -vserver demo-nfs-svm \ -policyname default -clientmatch 0.0.0.0/0 -rorule any -rwrule \ any -superuser any -anon 0 volume create -vserver demo-nfs-svm -volume vol2_dedup -aggregate \ aggr2 -size 6g -junction-path /vol2_dedup volume create -vserver demo-nfs-svm -volume vol3_compressed \ -aggregate aggr2 -size 6g -junction-path /vol3_compressed volume create -vserver demo-nfs-svm -volume vol4_mirrored \ -aggregate aggr2 -size 5g -junction-path /vol4_mirrored volume create -vserver demo-nfs-svm -volume vol4_mirror_dest \ -aggregate aggr2 -size 5g -type DP volume create -vserver demo-nfs-svm -volume vol5_plain \ -aggregate aggr2 -size 6g -junction-path /vol5_plain # SSC features volume efficiency on -vserver demo-nfs-svm -volume vol2_dedup volume efficiency on -vserver demo-nfs-svm -volume vol3_compressed volume efficiency modify -vserver demo-nfs-svm -volume \ vol3_compressed -compression true -inline-compression true snapmirror create -source-path demo-nfs-svm:vol4_mirrored \ -destination-path demo-nfs-svm:vol4_mirror_dest -type DP \ -vserver demo-nfs-svm snapmirror initialize -source-path demo-nfs-svm:vol4_mirrored \ -destination-path demo-nfs-svm:vol4_mirror_dest -type DP # enable v4.0, v4.1, pNFS nfs modify -vserver demo-nfs-svm -v4.0 enabled -v4.1 enabled \ -v4.1-pnfs enabled
