The NetApp unified driver for Data ONTAP operating in 7-Mode with iSCSI is a driver interface from OpenStack Cinder to NetApp Data ONTAP operating in 7-Mode storage controllers to accomplish provisioning and management of a storage-area network (SAN) block storage entity; that is, a NetApp LUN that uses the iSCSI protocol.
To set up the NetApp Data ONTAP operating in 7-Mode iSCSI driver for Cinder, the following stanza should be added to the Cinder configuration file (cinder.conf
):
[myIscsiBackend] volume_backend_name=myIscsiBackend volume_driver=cinder.volume.drivers.netapp.common.NetAppDriver netapp_server_hostname=hostname
netapp_server_port=80
netapp_storage_protocol=iscsi netapp_storage_family=ontap_7mode netapp_login=admin_username
netapp_password=admin_password
use_multipath_for_image_xfer=True max_over_subscription_ratio=1.0
reserved_percentage=5
consistencygroup_support = True
Be sure that the value of the | |
The value of | |
The value of |
Table 4.16, “Configuration options for Data ONTAP operating in 7-Mode with iSCSI” lists the configuration options available for the unified driver for a clustered Data ONTAP deployment that uses the iSCSI storage protocol.
Option | Type | Default Value | Description |
netapp_server_hostname |
Required | The hostname or IP address for the storage system or proxy server. The value of this option should be the IP address of either the cluster management LIF or the SVM management LIF. | |
netapp_server_port |
Optional | The TCP port to use for communication with the storage system or proxy server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS. | |
netapp_login |
Required | Administrative user account name used to access the storage system or proxy server. | |
netapp_password |
Required | Password for the administrative user account specified in the netapp_login option. |
|
netapp_storage_protocol |
Required | The storage protocol to be used. Valid options are nfs or iscsi . |
|
netapp_transport_type |
Required | http |
Transport protocol for communicating with the storage system or proxy server. Valid options include http and https . |
netapp_size_multiplier |
Optional | 1.2 | When creating volumes, the quantity to be multiplied to the requested OpenStack volume size to ensure enough space is available on the SVM (aka Vserver). This value is currently only used when ISCSI has been selected as the storage protocol to be used. |
netapp_volume_list |
Deprecated | This option has been deprecated in preference of netapp_pool_name_search_pattern . Backwards compatibility for this option remains, but this option will be removed in a future release of OpenStack. |
|
netapp_vfiler |
Optional | The vFiler unit on which provisioning of block storage volumes will be done. This option is only used by the driver when connecting to an instance with a storage family of Data ONTAP operating in 7-Mode. Only use this option when utilizing the MultiStore feature on the NetApp storage system. | |
netapp_storage_family |
Required | ontap_cluster |
The storage family type used on the storage system; valid values are ontap_7mode for Data ONTAP operating in 7-Mode, ontap_cluster for clustered Data ONTAP, or eseries for E-Series. |
netapp_lun_ostype |
Optional | linux |
This option defines the type of operating system that will access a LUN exported from Data ONTAP; it is assigned to the LUN at the time it is created. |
netapp_lun_space_reservation |
Optional | enabled |
This option specifies whether space will be reserved when creating Cinder volumes on NetApp backends using the iSCSI or FC storage protocols. If this option is set to enabled , LUNs created during volume creation or volume cloning workflows will always be thick provisioned. If this option is set to disabled , LUNs created during volume creation or volume cloning workflows will always be thin provisioned. Note that this option does not affect the implementation of Cinder snapshots, where the LUN clone that represents the snapshot will always be thin provisioned. Valid options are enabled and disabled . |
netapp_host_type |
Optional | linux |
This option defines the type of operating system for all initiators that can access a LUN. This information is used when mapping LUNs to individual hosts or groups of hosts. For a list of valid OS types, refer to the Data ONTAP documentation |
use_multipath_for_image_xfer |
Optional | If multipath has been enabled on your OpenStack hosts, then setting this option to |
|
netapp_pool_name_search_pattern |
Optional | (.+) |
This option is only utilized when the Cinder driver is configured to use iSCSI or Fibre Channel. It is used to restrict provisioning to the specified FlexVol volumes. Specify the value of this option as a regular expression which will be applied to the names of FlexVol volumes from the storage backend which represent pools in Cinder. ^ (beginning of string) and $ (end of string) are implicitly wrapped around the regular expression specified before filtering. |
reserved_percentage |
Optional | 0 |
This option represents the amount of total capacity of a storage pool that will be reserved and cannot be utilized for provisioning Cinder volumes. |
max_over_subscription_ratio |
Optional | 20.0 |
This option is defined as a float, and specifies the amount of over-provisioning to allow when thin provisioning is being used in the storage pool. A value of 1.0 will mean that the provisioned capacity will not be able to exceed the total capacity, while larger values will result in increased levels of allowed over-provisioning. |
consistencygroup_support |
optional | False | Enables support for Cinder consistency groups in the driver |
filter_function |
Optional | (see description) | This option may be used to override the default filter function, which prevents Cinder from placing new volumes on storage controllers that may become overutilized. The default value is "capabilities.utilization < 70". |
goodness_function |
Optional | (see description) | This option may be used to override the default goodness function, which allows Cinder to place new volumes on lesser-utilized storage controllers. The default value is "100 - capabilities.utilization". |