Clustered Data ONTAP

This section provides an example configuration script to be executed within Data ONTAP that enables one SVM appropriately configured for the Manila configuration referenced in the section called “manila.conf. Note that you may have to edit IP addresses and feature lists based on the environment and licenses present.

# create aggrs
storage aggregate create -aggregate aggr1 -diskcount 24 \
-nodes cluster-1-01

storage aggregate create -aggregate aggr2 -diskcount 24 \
-nodes cluster-1-02

# create SVMs
vserver create -vserver manila-vserver -rootvolume vol1 \
-aggregate aggr1 -ns-switch file -rootvolume-security-style unix

# NFS setup
nfs create -vserver manila-vserver -access true
network interface create -vserver manila-vserver \
-lif manila-nfs-data -role data -home-node cluster-1-02 \
-home-port e0d -address 10.63.40.153 -netmask 255.255.192.0

vserver export-policy rule create -vserver manila-vserver \
-policyname default -clientmatch 0.0.0.0/0 -rorule any -rwrule \
any -superuser any -anon 0

# enable v4.0, v4.1, pNFS
nfs modify -vserver manila-vserver -v4.0 enabled -v4.1 enabled \
-v4.1-pnfs enabled

# assign aggregates to vserver
vserver modify -vserver manila-vserver -aggr-list aggr1,aggr2
            



loading table of contents...